Epson MovieMate 62 Quick Setup Manual

Epson MovieMate

Quick Setup

Before using the projector, make sure you read the safety instructions in the
on-screen User's Guide.
Play a DVD
1
Plug in the projector. The
2
Insert your DVD into the slot. The projector will power on automatically.
3
Open the lens cover slide all the way. Your movie will be displayed.
See "Adjust the image" for more information.
Connect the projector
Choose from the following connections:
Computer Monitor Port
Connect a computer using a VGA cable (optional).
If you are using a notebook, switch it to external display. If you're using a
PC notebook, hold down the Fn key on the keyboard and press the function
key that lets you display on an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD. Allow a few seconds for the projector
to sync up after pressing it. Check your notebook's manual or online help for
details. You can also connect an audio cable.
*411950100*
*411950100*
62
®
power light on the projector turns orange.
PC port

Other Connections

Connect up to 3 video devices and use the remote control to switch
between them. You can also connect a microphone or USB thumb drive.
HDMI RCA video cable
(composite video)
cable
(optional) (optional)
Microphone
Turn on your equipment
NOTE: If you're playing a DVD, see "Play a DVD" instead.
1
Turn on your computer or video source.
2
Plug in the projector. The
3
Open the lens cover slide all the way.
Component
Audio cable video cable
(optional) (optional)
USB flash drive
power light on the projector turns orange.