Table of Contents
Advertisement
Operation
Before use, place the scale on a solid, levelled surface. Place any container or bowl
(if used) on the scale before operating it.
Gently press this button to turn on the scale.
The scale LCD display will show its start routine of segment as it powers on.
Wait until the '0' is shown on the display.
Place the item to be weighed on the scale (or in the bowl if required).
The LCD will show the weight reading.
After weighing press the button
scale. Alternatively, the scale powers off in 2 minutes if not in use.
The scale consists of unit systems like (g ,ml) and (lb:oz, fl:oz). Users can change units
from g to lb:oz or ml to fl:oz based on the load i.e. solid or liquid. While the scale is on,
select the required unit by pressing the
unit is shown, i.e - g/lb:oz or ml/fl'oz.
1. Weight mode
2. Milk volume mode
3. Water volume mode
for three seconds to turn off the
button for 3 seconds until the desired
8
Advertisement
Table of Contents
