Black & Decker BWDS Manual page 6

SET UP & USE
3. Align A (LEFT DRYER SUPPORT) and insert into C (UPPER LEFT FRONT
VERTICAL POLE) and D (UPPER LEFT REAR VERTICAL POLE), use (1) M (screw)
on each side to secure.
Follow the same steps to assemble the right side:
INSERT E1 (LOWER RIGHT REAR VERTICAL POLE) and F1 (LOWER RIGHT
FRONT VERTICAL POLE) into B1 RIGHT BASE. Use (1) M (SCREW) to secure on
each side.
Insert D1 (UPPER RIGHT REAR VERTICAL POLE) into E1 (LOWER RIGHT REAR
VERTICAL POLE).
Insert C1 (UPPER RIGHT FRONT VERTICAL POLE) into F1 (LOWER RIGHT FRONT
VERTICAL POLE),
Line up I (CONNECTING RAIL) with the holes on the front and rear poles as
shown and secure using (1) M (SCREW) on each side.
Align A1 (RIGHT DRYER SUPPORT) and insert into C1 (UPPER RIGHT FRONT
VERTICAL POLE) and D1 (UPPER RIGHT REAR VERTICAL POLE), use (1) M
(SCREW) on each side to secure.
Left side
Page 6
A
D
C
I
F E
B
D1 C1
I
E1 F1
B1
A1
Right side