Automatic Rf Testing With Nokia Care Suite - Nokia 301 Service Manual

RM-839; RM-840; RM-841
Cellular RF troubleshooting
Note: The window appearance may differ depending on the
Tool versions
7 RF tunings will be ready when all the tunings and measurements are green in the tool window and no
errors occur.
8 If errors do happen, failed tuning/testing steps are marked with a red color and more detailed results are
shown on the screen. An example fail case is shown below:
Note: The window appearance may differ depending on the
Tool versions.

Automatic RF testing with Nokia Care Suite

Testing And Tuning Tool add-on application can be used also for non-signalling RF tests. The automatic RF
testing procedure is the same as explained in the chapter
Testing And Tuning Tool main window instead of RF Tuning .
be selected in the
Issue 1 NOKIA INTERNAL USE ONLY
Copyright © 2013 Nokia. All rights reserved.
Nokia Care Suite and Testing And Tuning
Nokia Care Suite and Testing And Tuning
RF auto tuning procedure , but RF Testing should
Page 4 – 11