Faulty → Refer to "CHECKING THE
SWITCHES" on page 8-131 and "CHECK-
ING THE BULBS AND BULB SOCKETS" on
page 8-134.
EAS21810
ADJUSTING THE HEADLIGHT BEAM
The following procedure applies to both of the
headlights.
1. Adjust:
• Headlight beam (vertically)
▼
▼▼▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
a. Open the front storage compartments and re-
move the plugs.
b. Turn the adjusting screw "1" in direction "a" or
"b".
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
1
b
a
▲
▲▲▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
EAS21790
REPLACING THE HEADLIGHT BULB
The following procedure applies to both of the
headlight bulbs.
1. Remove:
• Headlight assembly
Refer to "GENERAL CHASSIS" on page 4-1.
2. Remove:
• Headlight bulb cover "1"
3. Disconnect:
• Headlight coupler (right side)
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
1
a
b
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
1
PERIODIC MAINTENANCE
4. Remove:
• Headlight bulb holder "1"
• Headlight bulb
A
▼▼▼
A. Right side
B. Left side
EWA13320
WARNING
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
5. Install:
• Headlight bulb
Secure the new headlight bulb with the head-
light bulb holder.
ECA13690
NOTICE
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
▲▲▲
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
6. Install:
• Headlight bulb holder
7. Connect:
• Headlight coupler (right side)
8. Install:
• Headlight bulb cover
9. Install:
• Headlight assembly
Refer to "GENERAL CHASSIS" on page 4-1.
3-25
B
1
1
New