Logitech ZONE VIBE 130 Setup Manual page 9

CHARGING
To conserve battery life, headphones
automatically power off after 30 minutes
without usage.
Sleep timer can be adjusted in Logi Tune.
The LED light on the headphones will
blink slowly in RED when the battery is lower
than 10%.
Charging via USB cable
1. Plug one end of the cable to the USB-C port
on the bottom of the earcup and the other
end into the USB-C charging port on your
computer.
2. The LED light will start breathing white when
charging.
3. The LED light will turn solid white when fully
charged.
– 2 hours will fully charge the battery.
– 5 minutes will give you 1 hour of playback.
Note:
Battery life may vary based on user, environment,
and computing conditions.
4. The headphones can be used with the receiver
and Bluetooth paired while charging.
®
LOGI TUNE
Logi Tune helps boost your headphones
performance with periodic software
and firmware updates.
It is recommended to update both your
headphones and receiver. To do so, download
Logi Tune from www.logitech.com/tune
Logi Tune
www.logitech.com/tune
9 English