Precautions Electrostatic Protection Before touching the device, or holding the boards or IC chips, wear the ESD gloves or the ESD wrist strap (Ensure that the other end of the ESD wrist strap is well grounded.) to prevent the electrostatic discharge of the human body from damaging the sensitive components.
Check Tools and Meters Before you begin, get the following tools ready. Marker pen Flathead screwdriver Phillips screwdriver Diagonal pliers Wire cutter Paper knife Adjustable wrench Mount bar Network cable crimping Tape measure Cable cutter pliers Network cable tester Multimeter Optical power meter ESD gloves ESD wrist strap...
Checking the Installation Description Method Do not place any materials on the chassis. Observe All the cables are bound with proper tightness. The space between the cable ties is even, and the Observe remaining parts of the cable ties are cut off neatly. All cable ties face the same direction, keeping the overall appearance nice.