Husqvarna PG 510 Operator's Manual page 5

Hide thumbs Also See for PG 510:
Table of Contents

Advertisement

Available languages

Available languages

Only use the product for operations that are given in
this manual. Refer to
Use personal protective equipment. Refer
Personal protective equipment on page 5 .
to
Do not go away from the product when the motor is
on.
Connect the motor cable to the electrical enclosure
before you connect the plug.
Do not let other operators use the product if they
have not read and understood the contents of this
operators manual.
Only start the product with the brush strip attached.
Brush strip must seal tightly to the surface,
especially during dry surface operations.
Make sure that the brush strip is not damaged and is
clean. Replace damaged brush strip.
Keep the motor on until the fan comes to a complete
stop.
Lift the grinding head if a check of the start
procedure is necessary.
Only start the product when the grinding head is put
on the surface.
Make sure that only approved persons are in the
work area.
Do not use the product in areas where fire or
explosions can occur.
Always disassemble the diamond tool after each
operation.
Make sure that the tool plate does not rotate if you
lift up the product. The tool plate continues to rotate
for a while after the motor stops.
When you remove diamond tools, let the product
become cool and use protective gloves. Diamond
tools are very hot after use.
Make sure to connect the product to a dust extractor
for removal of the dust.
Make sure that the product is assembled correctly.
To lift the product always use the lifting eye of the
product.
Do not use the product if there are signs of damage.
Only start the product when the grinding head
touches the surface, unless you do a check of the
ON/OFF switch.
Only operate the product from behind with your 2
hands on the handle.
Do not operate the product unless you receive
training before use. Make sure that all operators
receive training.
Make sure that only approved persons are in the
work area, because there is a risk of serious injury.
Make sure that clothing, long hair and jewelry do not
get caught in moving parts.
Make sure that you are in a safe and stable position
during operation.
Sudden appearance of persons and animals can
prevent safe operation of the product. Always
1146 - 002 - 09.12.2022
Intended use on page 2 .
operate the product carefully and be prepared to
stop the product if it is necessary.
Do not let children use or come near the product.
Make sure that there is always one more person
near when you use the product. If an accident
occurs, you can receive help when it is necessary.
Do not operate this product when you are tired,
ill, or if you use alcohol, drugs or medicine. This
can decrease your vision, your judgment or your
coordination.
Do not use a product that has been changed from its
factory specification.
Always use approved accessories. Speak to your
dealer for more information.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
Always use correct personal protective equipment
when you operate the product. The personal
protective equipment does not erase the risk of
injury. The personal protective equipment decreases
the grade of injury if an accident occurs. Let your
dealer help you select the right equipment.
Use approved eye protection while you operate the
product.
Do not use loose, heavy and not applicable clothing.
Use clothes that let you move freely.
Use approved protective gloves that enables a solid
hold.
Use rubber protective gloves that prevents skin
irritation from wet concrete.
Use an approved protective helmet.
Always use approved hearing protection while you
operate the product. Noise for a long period can
cause noise-induced hearing loss.
The product makes dust and fumes that contain
dangerous chemicals. Use an approved breathing
protection.
Use boots with steel toe-caps and non-slip soles.
Make sure that you have a first aid kit near.
Sparks can occur when you operate the product.
Make sure that you have a fire extinguisher near.
Electrical safety
WARNING:
shocks from electrical products. Do not use
the product in bad weather conditions. Do
not touch lightning conductors and metal
objects. Always use the product as given in
this operator's manual to prevent injury.
Read the warning
There is always a risk of
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

967 93 20-01

Table of Contents