Shower Head Installation; Maintenance And Care - Black & Decker Price Pfister R89 Series Installation Instructions Manual

12
UP
For
Shower
12B
12 TUB SPOUT FUNCTION
When the valve is turned on, water normaly flows through the Tub Spout (12A).
To activate the shower, turn valve on and pull the Knob (12B) up. Hold on until
water flows continiously from the shower arm.
13 UNIT START UP
Turn on hot and cold water supplies, and check all connections for leaks.
14
14C
14B
14 FINAL FLUSHING
For final flushing, turn valve on and allow water to run through the Tub Spout
(14A) for several minutes. Pull Spout Knob (14B) up to allow water to run through
Shower Hose (14C). Allow water to run for several minutes untill all foreign matter
clears the line.
ENGLISH
12A
14A
15
15A
15B

15 SHOWER HEAD INSTALLATION

Thread Hand Shower (15A) onto Hose (15B).
Make sure Hand Shower (15A) is securely tightened to Hose(15B).
MAINTENANCE & CARE
.
CAUTION: Maintenance
DISASSEMBLY
1. Replacement parts may be available at the store where you purchased
your faucet.
2. When replacement parts are not available, please write or call Price
Pfister Consumer Service.
3. Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative finishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepfister.com
• Installation Support
• Care and Warranty Information
4