Download Print this page

Fujitsu CG-301 Series Instruction Manual page 20

Advertisement

(3-5) E-ZOOM
This camera built in electronic zoom, electronic panning and electronic tilting function.
In this menu, these functions is specified.
E-ZOOM
ZOOM
→ 2.0
POSITION
RETURN
ZOOM
The zoom magnification is selected from the following.
OFF, 1.5, 2.0, 2.5
Note) When 1.5, 2.0 or 2.5 is selected, WD and MASKING function is not available.
POSITION
When the zoom magnification is selected for ZOOM, the position of the image can be adjusted.
Adjusting procedure
1. Move the cursor to ZOOM and select 1.5, 2.0 or 2.5.
2. Move the cursor to POSITION and press the SW. POSITION menu is displayed.
3. The frame position can be adjusted by turning on the SW up, down, left or right on this menu.
Note) Electronic tiltting function is limited by ZOOM. Only when the zoom magnification is 1.5, a full
tilting operation is possible.
(3-6) MASKING
This camera contains MASK function.
MASKING
MASK
MASK EDIT
MASK ERASE
RETURN
MASK
The mask display can be switched ON or OFF on the monitor screen.
MASK EDIT
The area of a mask can be edited. It is possible to make up to 8.
Editing procedure
1. Move the cursor to MASK and select ON.
2. Move the cursor to MASK EDIT and press the SW. MASK SETTING menu is displayed.
En-19
END
Fig.9-5 E-ZOOM menu
→ OFF
END
Fig.9-6 MASKING menu
POSITION
MASK SETTING

Advertisement

loading