PAN9520 ETU Evaluation Tool
3.13.2.2
2V8-3V3 Pin Header
Voltage on 2V8-3V3 (AVDD)
1.87 V (unusual)
2.8 V
3 V
3.3 V
If none of the described voltage levels is suitable for the used camera: custom voltages in the
range from 1.87 V to 3.3 V can be configured by using resistors instead of jumpers for
connecting the pins.
The output voltage can be determined by formula
•
R is the resistance that results from the applied circuit (see equation
•
R
is the resistance of the left
left
•
R
is the one of the right jumper replacement
right
= 0.8 ∙
= (165Ω +
User Guide Rev. 1.0
Jumper Configuration
59Ω
)||(150Ω +
)
ℎ
(3):
3 PAN9520 ETU
(4))
(3)
(4)
Page 25 of 35