Mitsubishi Electric PAC-SH63AG-E Series Manual page 2

How to Use / How to Install
●Carefully read this section 'Safety Precautions', and securely install the optional parts.
●Be sure to observe the cautions described here: They include critical contents for safety.
●The following indications show the classifications for danger, and possible consequences following incorrect handling.
Incorrect handling could lead to death or serious injury.
WARNING
Incorrect handling could lead to injury or damage to house and household articles.
CAUTION
●After installation, perform a test run and make sure that there is no abnormality, and ask your customer to keep this
installation sheet with the installation manual at all times. Also ask the customer to transfer these manuals to a new user
if the user changes.
Ask the dealer or specialist for installation.
●If installed incorrectly by user, water leak, electric shock, fire, etc.
could result.
Before performing installation (moving) and electrical work
Do not place polyethylene bags in reach of young children.
●Putting them over the head will block breathing passages,
which could result in suffocation.
Securely apply heat-insulation to refrigerant pipe so that no
condensation occurs.
●If heat-insulation is inadequate, condensation could occur on the surface of
pipes and dewdrops could accumulate on ceiling, floor or important goods.
D2-252
Air Protect Guide for cooling at -15
SAFETY PRECAUTIONS
WARNING
CAUTION
PAC-SH63AG-E
Carefully install the optional parts according to this installation
sheet.
●Incorrect installation could cause water leak, electric shock, fire, etc.
If electrical work is necessary, use only specified electric
wires adapted with current capacity.
●Use of unsuitable wire could cause electric leak, overheating or fire.
Securely perform drain piping work according to the
installation manual so that no condensation occurs.
●If piping work is incorrect, water leak may occur and ceiling,
furniture, etc may get wet.