Operating Instructions - Zanussi ZPPTH1 Manual & Safety Instructions

Parasol heater
Table of Contents

Advertisement

OPERATING INSTRUCTIONS

• Connect the power cable to a 220-240V, 13 amp supply
that is located in a safe, dry area.
• The heater must be properly installed before it is used.
• This unit is equipped with three heat settings.
The switches on the heater head are used to control the
heat settings:
Turn on the (•) switch to operate the heater at 650W.
Turn on the (••) switch to operate the heater at
1300W.
Turn on both switches (•&••) to operate the heater at
2000W (MAX).
Turn all the switches to the off position to turn off
the heater.
• WARNING: Although the parasol heater is shower proof,
do not use when raining or in wet conditions.
• WARNING: Always disconnect the power cable from the
electrical supply when the parasol heater is not in use.
15
Revision 1.2

Advertisement

Table of Contents
loading

Table of Contents