Page 1
AD0504041AE Portable CD Player SL-SX445EG Colour (S)...Silver Type Please use this manual together with the service manual for Model No. SL-SX450EB Order No.AD0502006C8. PDF created with pdfFactory Pro trial version www.pdffactory.com...
Page 2
SPECIFICATIONS Specification Audio (CD-DA) Sampling frequency: 44.1 kHz No. of channels: 2 (left and right, stereo) Frequency response: 20 to 20,000 Hz / (+0.5dB to - 7dB) Headphone output level: RMS max. 6mW+6mW/ 16 (adjustable) Pickup Light source: Semiconductor laser Wavelength: 780 nm Supported bit-rates (Supports...
Page 3
Using on a flat stable surface at 25°C, EQ is off, Hold is on, Anti- skip is on POS 1 (CD-DA), recommended bit rate (MP3: 128 kbps), and the Digital Re-master is off (MP3).Play time are inhoursand approximate. Batteries used: 2 optional alkaline batteries;...
Page 4
- This simplified service manual is provided to indicate the differences between the original model No. SL-SX450EB and the subsequent model No. SL-SX445EG. 2. Replacement Parts List Note: - Important safety notice: Components identified by mark have special characteristics important for safety.
Page 5
K0504YH/HM PDF created with pdfFactory Pro trial version www.pdffactory.com...
Page 6
ORDER No.AD0502006C8 Portable CD Player SL-SX450EB SL-SX450EE SL-SX450EG SL-SX450GC SL-SX450GN Colours (S)....Silver Type (A)....Blue Type (Only SL-SX450EE) Specification Audio (CD-DA) General Sampling frequency: 44.1 kHz Power supply: No. of channels: 2 (left and right, stereo) DC input; DC 4.5V Frequency response: 20 to 20,000 Hz AC adaptor input;...
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN radiation exposure. CAUTION: This product utilizes a liser diode with the unit turned “on”, invisible laser radiation is emitted from the pickup lens. Wave length: 780nm Maximum output wadiation power from pickup: 100 µW/VDE Laserradiationfromthepickup lens is safety level, but be sure the followings: 1.
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN 3 Handling Precautions for Traverse Deck The laser diode in the traverse deck (optical pickup) may break So, be careful of electrostatic breakdown during repair of the down due to potential difference caused by static electricity of traverse deck (optical pickup).
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN 4 Operation Checks and Component Replacement Procedures · This section describes procedures for checking the operation of the major printed circuit boards and replacing the main components. · For reassembly after operation checks or replacement, reverse the respective procedures.
Page 12
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN · Check the P.C.B. ass’y (A side) as shown below. 4.1.2. Checking for the P.C.B. ass’y · Check the P.C.B. ass’y (B side) as shown below. (B side) · Follow the (Step1)-(Step5) of item 4.1.1.
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN 4.3. Replacement for the LCD, button L, button R and multi button SW unit · Follow the (Step1)-(Step3) of item 4.1.1. · Follow the (Step1)-(Step5) of item 4.2. 4.4. Replacement for the spring holder and open spring ·...
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN 4.5. Replacement for the traverse motor · Follow the (Step1)-(Step3) of item 4.1.1. NOTE: Be sure to confirm the item 3 “Handling Precautions for Traverse Deck” before removing the traverse deck unit. 4.6.
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN 4.7. Replacement for the rest switch · Follow the (Step1)-(Step3) of item 4.1.1. · Follow the (Step1), (Step2) of item 4.5.
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN 5 Checking the Operation Problems on the Traverse Deck (Optical Pickup) Make sure to follow the procedures below to check the operation problems of the traverse deck (optical pickup) before replacing Replace the traverse deck only after the problem is identified.
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN 6 Automatic Adjustment Results Display Function (Self- check Function) On this units, each automatic adjustment results are displayed on the LCD. This function is convenient to check or identify which automatic adjustment circuit is incorrect. The followings are thecontentsof the automaticadjustmentresultdisplays (self-check function).
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN (check the waveform or voltage.) exchanging the traverse deck. Note: Note: It is not always necessary to exchange the traverse deck If any other disc than the test disc (SZZP1054C) is used, an when an error message is displayed.
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN 10 Schematic Diagram :POSITIVE VOLTAGE LINE :PLAYBACK SIGNAL LINE OPERATION & LCD UNIT LCD801(L5ACAEC00027) LCD DISPLAY R828 R827 R826 R825 R824 R823 8.2K 6.8K 8.2K 6.8K R822 A B C D E F G H I J K L M N O P Q R T U V W R821...
Page 24
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN :POSITIVE VOLTAGE LINE :PLAYBACK SIGNAL LINE 2.7V MA2J11100L UNR521500L DC IN DET. (BATTERIES) ICP11 ERBSE1R50U CN11 2.9V 2 R6/LR6(UM-3) B1BDND000001 BATTERIES REGULATOR 2.9V 5.3V UNR521L00L DC IN DET. (AC ADAPTOR) JK11 DC IN 4.5V 2.7V...
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN 11 Printed Circuit Board and Wiring Connection Diagram Note: This printed circuit board diagram may be modified at any time with the development of new technology. (SIDE : B) (SIDE : A) OPTICAL PICK-UP R122 R120...
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN 13 Terminal Function of ICs 13.1. IC101(AN22003A-NF): Terminal Function Name Servo Amplifier MCLK/SK Serial command clock / EEPROM clock output Terminal Function 19 MDATA/DI Serial command data output / EEPROM Name data output APC amplifier input terminal STAT...
Page 31
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN Terminal Function Terminal Function Name Name Not used, open MDATA Serial command data input Serial command latch input DRAM address signal output STAT Status signal output terminal BLOCK Sub-code block clock signal output LDQM Low byte data mask signal output SMCK...
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN 14 Replacement Parts List Notes: Ref. Part No. Part Name & Remarks Description *Important safety notice: RMA1775-1 SPRING HOLDER Components identified mark have special RMR1700-H LID COVER (EB)(EES)(EG) (GC)(GN) characteristics important for safety. RMR1700-A LID COVER (EEA)
Page 33
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description C201 F3F0G226A001 4V 22U RPN1696 TRAY 2 (EB) C301 ECUV1A105ZFV 10V 1U RPQ1934 (EEA)(EES) (EG)(GN) C302 ECUV1A105ZFV 10V 1U...