Frigidaire FGMV155CTF Use & Care Manual page 32

Disconnect the power cord or leave the door open to deactivate the oven
during cleaning. Disconnect the power cord before replacing filters and lights.
Cleaning the exhaust filters
The oven ventilation exhaust filters should be removed and
cleaned often; generally at least once every month.
Vent exhaust filter part number
To order parts call 800-599-7569
To avoid risk of personal injury or property damage, do
not operate oven hood without filters properly in place.
Surface lights
Tab
Ventilation
1. To remove the exhaust ventilation filters, slide the filter to
the rear. Then pull filter downward and push to the other
side. The filter will drop out. Repeat for the 2nd filter.
2. Soak the ventilation filters in hot water using a mild
detergent. Rinse well and shake to dry or wash in
Do not use ammonia. The aluminum
on the filter will corrode and darken.
3. To reinstall the exhaust ventilation filter, slide it into the
side slot, then push up and toward oven to lock.
Reinstall the 2nd filter using the same procedure.
32
5304478913
Front
Rear
filters
CLEANING AND CARE
Surface light replacement
To avoid risk of personal injury or property damage, wear
gloves when replacing the light bulbs.
1. Unplug the microwave oven or turn off power at the
main circuit breaker.
2. Remove the LED light cover mounting screws at both
light positions under the microwave.
3. Remove the LED light mounting screw.
4. Unplug the LED light from the harness, replace with
LED light of part# # # 5304499540. To order parts
#
800 - 599 7569. Then reconnect the harness.
-
5. Re-install LED light and mounting screw.
When re-installing mounting screw be careful
not to damage the LED light.
6. Re-install LED light cover and mounting screw.
7. P lug the microwave back into the power supply or
turn the power back on at the main circuit breaker.
call