Advertisement
2．Installing the Bezel to the Server
Take the steps below to install the bezel to the server.
●Read the sections "Safety Precautions" and "Handling precautions" in the User's Guide of the
server in which you are going to install the bezel to install or remove the bezel safely and
properly.
1. Install the front bezel as shown in figure below.
2. Lock the front bezel with the security lock key.
3. Stick the nameplate on the bezel shown by the slant lines in the figure below.
Name Plate
R120g-2E
NS500Rg
Unlocked
4
Locked
Advertisement
