Signal Menu; Xga Mode; Refresh Rate - Panasonic Viera TH-50VX100 Operating Instructions Manual

SET UP for Input Signals

SIGNAL menu

Note:
"SIGNAL" setup menu displays a different setting condition for each input signal.
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN SELECT
RGB
EXTERNAL SCALER MODE OFF
POWER SAVE OFF
STANDBY SAVE ON
POWER MANAGEMENT OFF
AUTO POWER OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
ENGLISH ( US )
OSD LANGUAGE

XGA MODE

This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA signals
with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @
60Hz, and 1,366 × 768 @ 60Hz). Be sure to make settings in accordance with the input signal in order to achieve a
more appropriate and attractive display.
In addition, after making this setting, be sure to make each adjustment (such as "AUTO SETUP") on the "POS. /SIZE"
menu as necessary. (see page 30)
[ COMPONENT ]
SIGNAL
XGA MODE 1024 ×768

REFRESH RATE

100 Hz
REFRESH RATE
This function sets the refresh rate of the display.
This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate.
100 Hz: Reduce screen flicker.
50 Hz: Enhance the resolution of moving images.
Note:
It is recommended to set to 100 Hz normally.
[ COMPONENT ]
SIGNAL
XGA MODE 1024 ×768
REFRESH RATE 100 Hz
40
For RGB
SIGNAL
SYNC
XGA MODE
REFRESH RATE
H-FREQ.
V-FREQ.
SIGNAL FORMAT
For COMPONENT
SIGNAL
XGA MODE
REFRESH RATE
H-FREQ.
V-FREQ.
SIGNAL FORMAT
change
2
1
select
1024×768 1280×768
2 change
1
select
100 Hz 50 Hz
[ RGB ]
AUTO
1024 ×768
100 Hz
33.7 kHz
60.0 Hz
1125(1080)/60i
For Digital
[ COMPONENT ]
SIGNAL
1024 ×768 REFRESH RATE
100 Hz
33.7 kHz
60.0 Hz DOT CLOCK-FREQ.
1125(1080)/60i SIGNAL FORMAT
1366×768
[ Digital ]
100 Hz
H-FREQ. 33.7 kHz
V-FREQ. 60.0 Hz
108.0 MHz
1125(1080)/60i