Table of Contents
Advertisement
Custom - Wireless Access Point
You can use the TV as a wireless access point and connect the network
equipment without an access point.
Confirm the PIN code, network settings of the equipment before starting
●
setup. For details, read the manual of the equipment.
1. Display the menu with MENU, select
2. Select
Network
>
and press
OK
to access.
3. Select
Connect to device
To set manually, select
●
4. Select and set
Push button
Push
button:
Set up the equipment for
the equipment.
PIN
code:
Enter the PIN code of the equipment.
If the connection fails, check the settings and positions of the
●
equipment. And then, follow the on-screen instructions.
■
Change settings
You can set up
Network
setting method
manually.
Follow the on-screen instructions and set manually.
Set
Reset settings
●
= Note =
You cannot connect the internet service while the TV is set to
●
Access
Point.
You can connect up to 7 devices. But the transfer rate varies according to
●
communication environment or the numbers of connected equipment.
To confirm the current network settings
●
Network > Network settings > Network Status
Main Menu
Network Connection
and press
OK
Change settings
/
PIN code
Push
button. For details, read the manual of
Name(SSID), Password,
to reset the items for
- 211 -
and press
>
Custom
>
Wireless Access Point
to access.
(see below).
and press
OK
to access.
Wireless type
Change
settings.
OK
to access.
and
Channel
Wireless
Advertisement
Table of Contents
