Philips 32BDL4051D User Manual page 56

- p 1 0 part0
- p 0 0 part1
a. The first line
1920 and 1080 define the width and height of the screen
resolution.
30 is the frame rate in fps (frames per second) i.e. number of
images to display per second.
b. The second and third lines have a same format.
The first "p" means that the play mode stops immediately when
the boot process is complete.
The number next to 'p' defines the repeat mode
Set to 0 to make the part loop indefinitely until the device
-
boot is complete.
- Set to 1 to make the part playback for once.
The next number defines the delay time(ms). For example, if it is
set to 10, the system will be delayed for 10ms when all image files
finished playing.
Part0 and part1 refer to image folder names.
As to the above example, the boot animation will play at a resolution of
1920 by 1080 pixels, at a frame rate of 30 fps, starting with the contents
of part0 folder. After playing them in one loop, switch to the contents of
part1 folder and play them continuously until the device boot process is
complete.
3. Zip file:
Select all (including image folders and desc.txt) inside the Bootanimation
folder and zip them into a new uncompressed zip archive using your
favorite compression utility such as 7zip or WinRAR and so on.
If using 7zip, set compression level to "Store".
If using WinRAR, set "Compression method" to "Store".
or bootanimation WON'T work
4. Apply the custom bootanimation
Procedure:
(1) Place your custom bootanimztion.zip file into the external SD
card or USB and plug the storage device into Phillips PD platform.
(2) Make sure that the Logo option is enabled.
Press the Home key on RCU: OSD menu > Configuration 2 >
Logo > set "User"
(3) Press the combination key "Home + 1888" on RCU to go to
Admin mode:
Settings > Signage Display > GENERAL SETTINGS > Boot Logo
(4) The system will search the bootanimation.zip on the external SD
card or USB automatically and copy it to /data/local
(5) Once the step 1~4 are complete, restart the system. The new
customized boot animation should be displayed during boot time.
5.12.3. How to Install Android app?
There are 3 ways to install your own Android App.
(a) Via File Manager in Admin Mode
1. If you have apk already
1.1 Copy your APK to the USB disk or SD card, and plug the
storage device into Philips Android Signage Display.
1.2 Go to Admin Mode > Apps > File Manager
1.3 Use File Manager to find your APK to be installed. Simply press
"OK" on the selected APK.
2. Download an APK using the Chromium browser, then go to
<internal storage path>/Download/ by File Manager.
2.1 The next steps are the same as described above. Please note,
each model may have different <internal storage path>.
45