Programming; Programmable Settings - Panasonic KX-TG5761S Operating Instructions Manual

Programming

Programmable settings

You can customize the unit by programming the following features using the handset. To
access the features, there are 2 methods:
– scrolling through the display menus (page 40)
– using the direct commands (page 44)
L Mainly the direct command method is used in these operating instructions.
L To change the base unit ringer volume and tone, see page 26.
Programming by scrolling through the display menus
1
{MENU} (middle soft key)
2
Press {^}, {V}, {<}, or {>} to select the desired menu. i {SELECT}
L If there are sub-menu(s), press {^} or {V} to select the desired item. i {SELECT}
Example: To access the handset ringer volume setting
Press {^}, {V}, {<}, or {>} to select (. i {SELECT}
Then press {^} or {V} to select "Ringer volume". i {SELECT}
3
Press {^} or {V} to select the desired setting.
L This step may vary depending on the feature being programmed.
4
{SAVE} i {OFF}
Monochrome display models: KX-TG5761/KX-TG5767/KX-TGA570
L When you find "*1" in the following table, refer to the note below.
*1 If you program these settings using one of the handsets, you do not need to program
the same item using another handset.
Main menu
Voice Mail
40
For assistance, please visit http://www.panasonic.com/phonehelp
Sub-menu 1
Store VM access#
VM tone detect
Message alert
Sub-menu 2
*1
*1
Page
– 52
– 52
– 54