Listening To Voice Mail Messages - Panasonic KX-TG6411 Operating Instructions Manual

Voice Mail Service
Turning VM tone detection on/off
The default setting is "On".
1
{MENU} i {#}{3}{3}{2}
2
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Listening to voice mail
messages
The unit lets you know that you have
new voice mail messages in the
following ways:
– "New Voice Mail" is displayed on
the handset if message indication
service is available.
– The message indicator on the handset
flashes slowly if message alert feature
is turned on ("Message alert"; page
36).
1
Press {C}, then press {VM} within
15 seconds.
OR
{MENU} i {#}{3}{3}{0}
L The speakerphone turns on.
2
Follow the pre-recorded
instructions.
3
When finished, press {OFF}.
Note:
L If {VM} is not displayed, the voice mail
access number has not been stored.
Store the number (page 37).
L If the handset still indicates there are
new messages even after you have
listened to all new messages, turn it
off by pressing and holding {OFF}
until the handset beeps.
L If your voice mail service uses voice
mail tones and a message is over 3
minutes long, the handset may not
indicate new messages.
L If your voice mail service uses voice
mail tones, the tones are heard from
any phone connected to the same
38 For assistance, please visit http://www.panasonic.com/help
line. If you want to use another phone
to listen to voice mail messages, you
have to dial your access number
manually.