Table of Contents
Advertisement
Note:
L You can select a line manually
regardless of the line selection mode by
pressing {LINE1} or {LINE2}.
Flash time
The flash time depends on your telephone
exchange or host PBX.
L You only need to program this setting
once, using either the handset or base
unit.
Important:
L The setting should stay at 700 ms unless
pressing {FLASH} fails to pick up the
Call Waiting call.
Handset
1
{MENU} (F2) i x i {SELECT}
2
"Set tel line" i {SELECT}
3
"Set flash time" i {SELECT}
4
Select the desired line.
5
Select the desired setting. (Default:
"700ms") i {SAVE} i {OFF}
Base unit
1
{MENU} i h i {SET}
2
"Set tel line" i {SET}
3
"Set flash time" i {SET}
4
Select the desired line.
5
Select the desired setting. (Default:
"700ms") i {SET} i {STOP}
Note for handset and base unit:
L If the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
For assistance, please visit http://www.panasonic.com/phonehelp
Programmable Settings
Line mode
Generally, the line mode setting should not
be adjusted.
When another phone connected to the
same line is in use, and
– if k or l is not displayed on the
handset, or
– if {LINE1} or {LINE2} button light is off
on the base unit,
you need to change the line mode to "A".
L You only need to program this setting
once, using either the handset or base
unit.
Handset
1
{MENU} (F2) i x i {SELECT}
2
"Set tel line" i {SELECT}
3
"Set line mode" i {SELECT}
4
Select the desired line.
5
Select the desired setting. (Default: "B")
i {SAVE} i {OFF}
Base unit
1
{MENU} i h i {SET}
2
"Set tel line" i {SET}
3
"Set line mode" i {SET}
4
Select the desired line.
5
Select the desired setting. (Default: "B")
i {SET} i {STOP}
75
Advertisement
Table of Contents
