Information Acquisition Interval Setting Change - Panasonic PT-D10000 Setup And Operation Manual

Information Acquisition Interval Setting Change

Information Acquisition Interval Setting Change
1
Select Options → Setting on the menu bar
1.
2. Select the General tab, and enter the desired time (unit: minutes) in the Interval Time text box
diagram).The setting range is from 1 to 9,999 minutes, in 1-minute steps.
* If the Update Interval of Projector Information checkbox is not selected, information will not be updated
automatically.
* If the Check Start Up checkbox is selected, information will be updated at each startup of the software.
3. Click Update to apply the new settings
(1 in the above diagram).
(3 in the above diagram).
2
3
(2 in the above
24