Table of Contents
Advertisement
7 Basic operation
7.1 Switching on the appliance
Press
.
▶
a The appliance starts at fan setting 2.
7.2 Switching off the appliance
Press
.
▶
7.3 Setting a fan setting
Press , or .
▶
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Press
to switch on the intensive setting 1.
1.
In order to switch on the intensive setting 2, press
2.
.
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
7.5 Switching off intensive mode
Press , or .
▶
7.6 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
Press
.
▶
a The fan run-on starts at fan setting 1.
a The appliance switches off automatically after ap-
prox. 10 minutes.
7.7 Switching off the fan run-on
Press
.
▶
7.8 Switching on automatic mode
The optimum fan setting is set automatically using a
sensor.
Press .
▶
7.9 Switching off automatic mode
Press , or .
▶
a The ventilation is automatically ended when the
sensor detects no further change in the room air
quality.
a Automatic mode runs for a maximum of four hours.
7.10 Sensor sensitivity
In automatic mode, a sensor in the appliance detects
the intensity of the cooking and roasting fumes. De-
pending on the setting of the sensor sensitivity, the op-
timum fan setting is automatically switched on. If the
1
Depending on the appliance specifications
sensor control system reacts too weakly or too
strongly, the setting for the sensor sensitivity may
change.
¡ Factory setting: 3
¡ Lowest setting: 1
¡ Highest setting: 5
7.11 Setting the sensor sensitivity
Requirement: The appliance is switched off.
Press and hold .
1.
a The setting is displayed after approx. one second.
Press , , ,
2.
Release
3.
7.12 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Note: Colour temperature settings are available in the
Home Connect app provided the appliance has this
function.
Press
▶
7.13 Setting the brightness
Press and hold
▶
reached.
7.14 Switching on Ambient Light
You can switch on the Ambient Light independently of
the ventilation system.
Press
▶
7.15 Ambient Light
Press and hold
▶
reached.
1
7.16 Ambient Light
Requirement: The appliance is switched off.
Press
1.
Press
2.
set.
1
7.17 Setting the intermediate position for
the filter cover
On some appliances, the filter cover can be adjusted to
an intermediate position. The intermediate position can
be used to eliminate particularly strong cooking smells
and large amounts of steam.
Take hold of the filter cover in the centre and open it
▶
carefully.
or
to change the setting.
to save the setting.
.
until the required brightness is
.
1
- Setting the brightness
until the required brightness is
1
- adjusting the colour
.
or
repeatedly until the required colour is
Basic operation en
1
7
Advertisement
Table of Contents
