Holder Loudspeaker & Adhesive Loudspeaker Lid & Adh Speaker; Back & Adh Vib Conn & Adh With Mesh 14 X 5 - Sony Xperia Z2 Working Instructions

Replacement
4.23 Holder Loudspeaker & Adhesive Loudspeaker Lid & Adh
Speaker Back & Adh VIB Conn & Adh with mesh 14 x 5
Follow the 3.1 – 3.4 Disassembly instructions!
Follow the 4.40 and 4.25 Removal instructions!
Carry out the Removal as described below.
Prepare the new Holder Loudspeaker & Adhesives.
Carry out the Installation as described below.
Follow the 4.25 and 4.40 Installation instructions!
Follow the 5.5 – 5.8 Reassembly instructions!
REMOVAL
Remove the four Screws by using a screwdriver with
Bits (JCIS No 0).
Scrap! Not to be reused.
Release the flex lid over the Loudspeaker when the
Plate Speaker has been removed, chapter 4.25
Release the flex over the MIC.
1285-2552 Rev 8
© Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
40(80)