Problem Areas
1.23 Battery Test
1.23.1 Battery Test Fails
Check:
Inspect the contact pads on the battery.
Action:
1. If dirty or oxidized – clean the pads.
2. If damaged – replace the battery.
Check:
Inspect the battery contact pins.
Action:
1. If dirty or oxidized – clean the contact pins.
2. If adhesive is detected on the contact pins, use an eraser
to gently rub off the adhesive.
3. If damaged – Replace Main PBA.
1273-2281 Rev2
©
Sony Mobile Communications AB – Company Internal
Troubleshooting Guide (mech)
36(48)