Page 3
1. Precaution Please read the precaution as follows to prevent any damages to the LCD Monitor. Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status. Prepare soft cloth and sponge as working platform to place LCD monitor horizontally. Hold LCD by the side carefully and DON’T touch or press panel directly. ...
3. Disassembly SOP Put the monitor on a flat surface (Put the EPE on under the monitor) Remove the screw * 4pcs Tool : Screwdriver #2 Use the C/D disassembly tool to release Rear cover hook from disassemble hole on bottom Remove the screws to remove the HINGE ASS'Y Tool : Screwdriver #2...
Page 6
Remove the Key Board. Disconnect the pins Remove All screw. Tool : Screwdriver #2...
Page 7
The Panel The Bezel Remove All screw. Tool : Screwdriver #2...
Page 8
Disconnect the pins The Mainframe The Rear Cover...