Signature Capture - Panasonic Toughbook CF-08TX1A1M Operating Instructions Manual

Signature Capture

Signature Capture operates on CF-08, supporting input of signatures in applications
running on the connection destination server.
At the time of purchase, this wireless display is not preset to enable startup of Signature Capture.
Before using Signature Capture, set the wireless display to enable startup using
one of the following methods.
When launching with the keyboard but-
ton or USER button
A Double-tap
B Double-tap [Buttons].
C Select [Signature Capture] from
among the buttons to be used
(keyboard button or USER but-
ton), set the push length (short
push or long push), and tap
D Save the above setting.
Refer to step
To use Signature Capture:
A Launch Signature Capture with the keyboard button, USER button or Quick Menu.
B Tap , and then tap [Setting].
You can set the pen width and image size.
C Write a character or symbol, and tap [Capture].
The image input by handwriting will be copied onto the server, and Signa-
ture Capture will close.
To view the handwritten image:
Check to make sure that the server is set to enable Signature Capture data to be pasted.
A Connect to the server. (
B Tap [Start] - [Run].
C Input [clipbrd.exe] and then tap [OK].
The [ClipBook viewer] screen will appear.
on the desktop.
.
9
of "First-time Operation" (
page 30)
When launching with Quick Menu
At the time of purchase, this wire-
less display is set so that Quick
Menu can be started up with a short
push of the USER button.
B Double-tap [Quick Menu].
C Select a button, select [Signa-
ture Capture] from [Assign a
Function], and then tap
page 27).
.
47