Charging With The Supply Unit - Philips 5000 Series Manual

Charging with the supply unit

When the appliance is fully charged it has a
cordless operating time of up to 60 minutes.
Note: You cannot use the appliance while it is
charging.
Warning: Keep the USB cable and the USB
supply unit dry.
1 Make sure that the appliance is switched off.
2 Insert the small plug of the USB cable into the
socket in the bottom of the appliance.
3 Insert the USB plug into the USB supply unit
(not provided).
4 Insert the USB supply unit into the wall socket.
While the appliance is in quick charge
-
mode, the lights of the battery status
indicator light up one after the other. After
approximately 5 minutes, the bottom light
of the battery status indicator flashes. The
battery now contains enough energy for
one full shave.
While the appliance charges, first the
-
bottom light of the battery status indicator
flashes and then lights up continuously.
Next the second light flashes and then
lights up continuously, and so on until the
appliance is fully charged.
When the appliance is fully charged, all
-
three battery indicator lights light up
continuously. After approx. 30 minutes, the
light goes out automatically.
5 After charging, remove the USB supply unit
from the wall socket, pull the USB plug out of
the supply unit and then pull the small plug out
of the appliance.
36
English