Loading The Paper Tray - JVC GV-DT1 Instructions Manual

14
EN
A
To printer
D etection marks
Downloaded from:
Printing side
Cautions
Partition panel
O utput tray
https://www.usersmanualguide.com/

LOADING THE PAPER TRAY

Opening the paper tray
● Open the lid while pushing
Inserting blank paper sheets in the
paper tray
1. Keep the partition panel upright. If it is
tilted, get it upright by pushing the back of
the paper tray.
2. Load print sheets in the tray, placing the
side with the detection marks toward you,
face down.
• Sticker sheets are not provided with
detection marks. Simply load them so that
the printing side faces upward.
• The tray can hold up to 25 sheets at one
time.
Be sure to read " Precautions when
inserting printing paper" on the back of
the paper tray lid.
Loading/ unloading the paper tray
● When loading, push the tray until it clicks.
● When unloading, push the tray slightly to
unlock the latch, then pull it out.
.
A