Panasonic Toughbook CF-19ACUAL1M Operating Instructions Manual page 17

Some UI (User Interface) strings remain in English even if the user's UI is set to
another language.
For further information, refer to "c:\windows\mui\relnotes.txt".
If you change the language in [Languages] - [Language used in menus and dia-
logs], the desktop color will be changed when logging on to Windows next time.
The desktop color can be changed by following the procedure below.
Click [start] - [Control Panel] - [Appearance and Themes] - [Display] - [Desktop]
and select color from [Color], then click [OK].
10 Perform the touchscreen calibration.
<Only for model with touchscreen>
Before performing the calibration, close Tablet PC Input Panel.
NOTE
At fi rst, log on to Windows as an administrator, and perform this calibration.
Return the rotated display to [Primary Landscape] before the touchscreen cali-
bration.
A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set-
ting].
B Click [Calibrate].
C Using the stylus, touch each of the "+" target marks one by one.
NOTE
Perform the following calibration for each user.
A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set-
ting].
B Click [Calibrate...].
C Using the stylus, touch each of the "+" target marks one by one, and then
click [Yes].
Perform the calibration for the orientation to be used.
A Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen
Calibration Utility].
B Using the stylus, touch each of the "+" target marks one by one until it blinks,
and then press Enter .
C Press Enter .
<Only for model with Dual Touch>
NOTE
Perform these calibration for each user.
If you cannot touch the desired position, perform Digitizer Calibration again and
restart the computer.
A Run [Calibration Utility].
*3
Click (Start) - [All Programs] - [Panasonic] - [Calibration Utility].
B Select [Touch input].
To calibrate more accurate, add a check mark for [Advanced calibration].
C Using the digitizer pen, touch each of the "+" target marks one by one.
Perform the calibration for the orientation to be used.
*3
Windows XP :[start]
17