Panasonic Toughbook CF-52AJC15AM Operating Instructions Manual page 14

First-time Operation
14
4 Setup Windows.
A Follow the on-screen instructions.
After the computer is turned on, the screen remains black or unchanged for a
while, but this is not a malfunction. Wait for a moment until the Windows
setup screen appears.
Setup of Windows will take approximately 20 minutes.
Go to the next step, confirming each message on the display.
CAUTION
You cannot choose the following words for user name and password: CON,
PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.
Do not use an "@" mark for user name. If you create a user name that includes
an "@" mark, a password will be requested at the log-on screen, even if no pass-
word has been set. If you try to log on without entering a password, "The user
name or password is incorrect." is displayed and you will not be able to log on to
Windows ( page 21).
You can change the user name, password, image and security setting after
setup of Windows.
Remember your password. If you forget the password, you cannot use the Win-
dows. Creating a password reset disk beforehand is recommended.
The wallpaper for the first logon user has already been set on "
When using this computer under the Sun, the screen becomes easily viewable
by changing the wallpaper to the white wallpaper.
A Right-click on the desktop, and click [Personalize] - [Desktop Background].
B Select [Solid Colors] at [Picture Location].
C Select the white wallpaper and click [Save changes].
When you set date/time/time zone and click [Next], the screen may not go to the
next step for a few minutes. Do not touch the keyboard or touch pad, and wait
until the screen changes.
If "An unexpected error has occurred ..." (or a similar message) is displayed,
click [OK]. This is not a malfunction.
Wait until the hard disk drive indicator
5 Create a new account.
A Click [start] - [Control Panel] - [User Accounts] - [Create a new account].
CAUTION
Remember your password. If you forget the password, you cannot use the Windows
operation system. Creating a password reset disk beforehand is recommended.
6
<Only for model with touchscreen>
Perform the touchscreen calibration.
At first, log on to Windows as an administrator, and perform this calibration.
A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Setting]
- [Calibrate].
B Using the stylus, touch each of the 16 "+" target marks one by one, and then
click [Yes].
C Click [OK].
Perform the following calibration for each user.
A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Setting]
- [Calibrate].
4
Setup Windows.".
has turned off.