Panasonic Toughbook CF-52EKMBGAM Reference Manual page 30

WinDVD
CAUTION
Do not start WinDVD while the drive indicator
While WinDVD is running, do not:
*2
• Enter sleep or hibernation.
• Switch the display mode by pressing
During motion video playback, do not:
• Eject the disc.
• Use other applications or the Command Prompt.
• Change the settings of the screen properties.
Do not install another player software together with WinDVD.
Doing so may interfere with smooth playback. Some DVD-Video discs contain the player software and start installing. In
this case, cancel the installation as soon as possible. If you accidentally installed another player software and find a prob-
lem in playback, try either of the following procedures.
• Uninstall the player software with the following procedures. (Refer to the instruction manual for the name of player
software.)
Click (Start) - [Control Panel] - [Uninstall a program].
Click [start] - [Control Panel] - [Add or Remove Programs].
• Set WinDVD as the playback software if you can select the option in the player software settings.
*2
Windows XP: standby
*3
Windows 7 only
DVD Discs Created Using a DVD Recorder
Playback may not be possible depending on the DVD recorder or the discs.
*4
You must finalize DVD-R, DVD-R DL, DVD-RW, +R, +R DL, and +RW before playback. For further information, refer to
the instruction manual of the DVD recorder.
You cannot play discs protected with copyright management technologies such as CPPM (Content Protection for Prere-
corded Media) and CPRM (Content Protection for Recordable Media).
*4
A process that enables the playback of the discs on other DVD players, etc.
is blinking immediately after the computer is turned on.
*3
+ P or Fn + F3.
30