Problem Areas: Vibrator
3. If the BtB connector on Sub PBA is damaged – replace the
Sub PBA.
4. If the FPC of Main FPC Assy is damaged – replace the Main
FPC Assy.
Check:
Inspect the BtB connector of Main FPC Assy to Main PBA.
Action:
1. If not properly connected – disconnect and reconnect it.
2. If dirty or oxidized – clean it.
3. If the FPC of Main FPC Assy is damaged – replace the Main
FPC Assy.
4. Replace Main PBA.
1290-1679 Rev 3
©
Sony Mobile Communications AB – Company Internal
Troubleshooting Guide (mech)
26(58)