Panasonic Toughbook CF-H1ADBAZCM Reference Manual page 66

Fingerprint Reader
Static electricity may also cause the sensor to malfunction. To make your finger static-free, touch a metal surface before
placing it on the fingerprint sensor. Exercise caution against static electricity in winter and other dry conditions.
Malfunction or damage may occur when:
• The fingerprint sensor surface was damaged by the strong rubbing of a solid material, scratches, or being pecked with a
pointed item.
• The sensor was touched with a finger soiled with mud, damaging the sensor surface with a tiny substance, and staining
the surface.
• The sensor surface was covered with a seal, or soiled with ink.
Deleting (Initializing) Owner's Data
When you dispose of the computer or transfer the ownership, delete (initialize) the owner's data to avoid unauthorized
access.
NOTE
The data enrolled in the fingerprint sensor is not image data. You cannot restore fingerprint image data from the data
enrolled in the fingerprint sensor.
1
Disable Power-on Security
Performed by the Computer Administrator.
Click (Start) - [All Programs] - [Protector Suite QL] - [Control Center].
A
• The [Fingerprint Control Center] screen appears.
Click [Settings], and click [Power-on Security].
B
Remove the check mark from [Enable power-on security using fingerprints], and click [OK].
C
Click [Fingerprints], and click [Enroll or Edit Fingerprints].
D
• [User Enrollment] wizard starts. Follow the on-screen instructions.
When the [User's Fingers] screen appears, click [Next] without deleting fingerprint samples.
E
Click [Manage Passwords].
F
Select [Power-On] in [Password Types], and click [Unset password].
G
Enter the password for Power-on Security, and click [OK].
H
Click [Close].
I
• Confirm that there is no item in [Password Types].
Click [Next] - [Next].
J
Click [Finish].
K
• Follow the on-screen instructions.
66