Panasonic Toughbook CF-U1AQB11AM Operating Instructions Manual page 41

Starting Up
Cannot resume.
Other startup
problems.
An error may occur when the computer automatically enters the
sleep (
tion mode while the screensaver is active. In this case, turn off
the screensaver or change the pattern of the screensaver.
If you press and hold the power switch for 4 seconds or
longer, the power will be turned off forcibly and the computer
will not resume. In this case, all unsaved data will be lost.
You disconnected the AC adaptor and the battery pack while
the computer was in sleep (
(
nected in sleep (
unsaved data will be lost and the computer will not resume.
The battery is exhausted. Sleep (
(
Press + (F9) in the Setup Utility (
Manual "Setup Utility") to return the Setup Utility set-
tings (excluding the passwords) to the default values.
Start the Setup Utility and make the settings again.
Remove all peripheral devices.
Check to see if there was a disk error.
A Remove all peripheral devices including an external display.
B Click (Start) - [Computer] and right-click [Local
Disk (C:)], and click [Properties].
C Click [Tools] - [Check Now].
A standard user needs to enter an administrator password.
D Select the option in [Check disk options] and click [Start].
E Click [Schedule disk check] and restart the computer.
A Click [start] - [My Computer] and right-click [Local
Disk(C:)], and click [Properties].
B Click [Tools] - [Check Now].
C Select the option in [Check disk options] and click [Start].
Start the computer in Safe Mode and check the error details.
When the [Panasonic] boot screen disappears
and hold +
Menu is displayed. Select the Safe Mode and press
*1
When [Password on boot] is set to [Enabled] in the [Security]
menu of the Setup Utility, [Enter Password] appears after the
[Panasonic] boot screen disappears. As soon as you enter the
password and press
) / standby (
). If the computer's power supply is discon-
) / standby (
) and hibernation consume some power.
(F8) until the Windows Advanced Options
(Enter), press and hold
) or hiberna-
) / standby
),
) / standby
Reference
at startup, press
*1
(Enter).
+ (F8).
41