Table of Contents
Advertisement
VCR
EJECT
TAPE
TIMER REC
REFRESH
CH
REC/OTR
JET REW
R
AV2 IN
VIDEO
L
AUDIO
To AV2 IN (video input) socket
Video cable, etc. supplied
with camera
Digital camera (Not supplied) or
Video camera (Not supplied), etc.
VIDEO
OUT
Adding Music to Video
(MUSIC WITH PICTURE)
You can enjoy music fed from a disc while images taken by digital
cameras or video cameras are being played. The video and music
being played can be recorded on a video cassette.
Preparations
≥Connect a camera to this unit as shown.
≥Confirm that the TV is on and the unit viewing channel is
selected.
≥Insert the disc containing the music to be played with images.
(lpage 32)
≥If you wish to record the images and music onto a video cassette,
insert a video cassette tape with an intact erasure prevention tab.
(lpage 20)
Common procedures
1
Switch [VCR/TV/DVD] to "DVD".
Press [ 1](PLAY) to start playing the disc to find
2
the playing start point.
Press [;/D] at the playing start point to transit to
the pause (still) mode.
3
Press [MUSIC w/ PICTURE].
≥The video is automatically input
through the AV2 IN terminal.
Audio is switched to DVD.
STOP
PLAY
PICTURE
TI
MODE
CH
Display Symbol
ª When playing back
4
Start playing on the camera.
≥Initially, the "A2" channel is selected. However, if the camera
is not played (the external input is not used), you may press
[CH]IJ to switch to the video of a TV program. (Audio
stays on DVD.)
Press [ 1](PLAY) to start playing the DVD on this
5
unit.
To stop playing the disc
Press [∫].
To cancel MUSIC WITH PICTURE mode.
Press [MUSIC w/ PICTURE].
Notes:
≥While in the MUSIC WITH PICTURE mode, pressing
[VCR/DVD OUTPUT] does not switch the output.
ª Recording onto a video cassette
You can start recording onto a video cassette at the same time of
disc playback. Only the discs, the audio on which is not copy
protected can be used.
4
Switch [VCR/TV/DVD] to "VCR".
Press [ 1](PLAY) to start playing the video cassette
5
to find the recording start point.
Press [;/D] at the recording start point to transit to
the pause mode.
¥
Press [REC
] to switch this unit from the pause
mode to the recording standby mode.
6
Press [SPEED] to select the desired tape speed
(lpage 20).
7
Start playing on the camera.
8
Press [;/D].
≥Video recording and disc playback start at the same time.
To stop recording
1) Press [∫]. Recording will stop.
2) Switch [VCR/TV/DVD] to "DVD".
3) Press [∫]. Disc playback will stop.
≥Stopping recording does not cancel the MUSIC WITH
PICTURE mode.
To cancel the MUSIC WITH PICTURE mode.
Press [MUSIC w/ PICTURE].
Notes:
≥When the disc is copy protected, the music will not be recorded
correctly.
53
Editing (continued)
Advertisement
Table of Contents
