Set up for built in disa auto attendant by telquest (3 pages)
Summary of Contents for Panasonic KX-TA824
Page 1
FAX: +1 414 978 7282 Email: info@wanetelecoms.com Website: www.wanetelecoms.com Advanced Hybrid System PC Programming Manual KX-TA/TES/TEM824 Model No. Thank you for purchasing a Panasonic Advanced Hybrid System. Please read this manual carefully before using this product and save this manual for future use.
Page 2
The Programming Manual is designed to serve as an overall system programming reference for the Panasonic Advanced Hybrid System. It explains how to program this PBX using Panasonic proprietary telephones (PTs) or the KX-TA Maintenance Console software. The Programming Manual is divided into the following sections: Section 1, Overview Provides an overview of methods of programming the PBX, and information about password security.
Page 3
Feature Manual References The Feature Manual explains what the PBX can do, as well as how to obtain the most of its many features and facilities. Sections from the Feature Manual are listed throughout the Programming Manual for your reference. Operating Manual References The Operating Manual describes how users can access commonly used PBX features and functions with their PTs, single line telephones (SLTs), and Direct Station Selection (DSS) Consoles.
Page 4
List of Abbreviations Automated Attendant Analog Proprietary Telephone Background Music Built-in Voice Message Outside (CO) Line Class of Service Calling Party Control Direct In Line DISA Direct Inward System Access Do Not Disturb Direct Station Selection DTMF Dual Tone Multi-Frequency External Feature Access Group Intercept Routing—No Answer...
Table of Contents Overview....................11 Introduction .......................... 12 1.1.1 Introduction ..........................12 PC Programming—Introduction ............. 81 Introduction .......................... 82 PC Programming........................82 3.2.1 Installing and Starting KX-TA/TES/TEM Maintenance Console .......... . 82 Software Modes ...
Page 6
PC Programming—Opening Screen ............. 87 Software Modes........................88 PC Programming—File................91 New ............................92 Open ............................92 Close ............................92 Save ............................93 Save As ..........................93 File Transfer PC to PBX ...
Section PC Programming—Introduction This section serves as reference operating instructions when using the KX-TA Maintenance Console software to program the PBX. Programming Manual...
3.1 Introduction Introduction Maintenance Console allows you to perform system setup and maintenance of the PBX, KX-TA824. The types of operations that can be performed with Maintenance Console are as follows: • Backing up and restoring system data • Viewing and modifying system settings •...
Page 13
3.3 Software Modes such as firmware upgrade can be performed. To enter Interactive mode, check the Connect to PBX box on the password entry window when starting up Maintenance Console, or select an option from the Connect menu. When a new window is opened and the relevant data is downloaded from the PBX, that data is cached temporarily in the PC.
3.4 Status Bar Menu Submenu Initial Mode Batch Mode Interactive Mode View Tool Bar Programmer Installer Level Code Change User Level Screen Customize System Data Setting Menu Utility Firmware Upgrade Quick Setup System Reset Normal Default System Data Clear DISA OGM Clear BV Card Initialization Window Cascade...
3.5 Access Levels Area Values Description Firmware Version Ver x.x.x xxxxxxxxxxxx Displays the version number of the PBX (e.g., Ver 1.0.0 software. The numbers following are the ROM Y591AA030519) version and the date of creation. PBX Model Code Displays the model code assigned to the PBX. Access Levels There are 2 main levels of access to the Maintenance Console software: Installer and User.
Page 16
3.6 Standard Buttons Programming Manual...
Page 17
Section PC Programming—Opening Screen This section describes the options available when starting Maintenance Console. Programming Manual...
Page 18
4.1 Software Modes Software Modes Every time Maintenance Console is started, a dialog box will appear. From here, you can enter any of the 3 available software modes. To start Maintenance Console in Initial mode Enter the relevant programmer code (User or Installer level). Click OK.
Page 19
4.1 Software Modes Parameter Values Explanation Word Length 8 bits Displays the number of bits in a word. This value cannot be changed. Stop Bit 1 bit Displays the length of the stop, used to identify the end of a transmitted group of bits. This value cannot be changed.