Fm Transmitter - Panasonic DVD-LX95 Operating Instructions Manual

FM transmitter

You can enjoy listening to discs or SD through your FM radio channel (e.g. car stereo) by transmitting
audio signals from this unit.
Disconnect the headphones or audio/video cable from the unit.
1
ON ON
2
3
Tune the radio to the 88.3 MHz FM frequency.
When another FM broadcast is heard.
(➜ see below, step 2-2 in "When this has not been successful")
4 Adjust the volume using the radio.
To turn off the FM transmitter : Press [FM-TM].
The button changes from orange to green. (When KEY ILLUMINATION "OFF" is selected, the light
goes out.) (➜ page 13)
When this has not been successful
1
j When the FM transmitter is on
Press twice consecutively to display the menu.
≥Noise is heard from the FM radio channel between each press.
j When the FM transmitter is off
Press to display the menu.
≥No sound is heard from the unit.
2
ENTER ENTER
3
Tune the FM radio into the frequency selected in step 2.
When noise is heard, bring the antenna and this unit closer.
Play the disc or SD card.
Press to switch the FM transmitter on.
The button changes from green to orange.
≥ No sound is heard from this unit. Adjust the volume on the unit using
the volume scale on the LCD as your guideline.
– When playing a music CD, adjust to a level near the center of the
volume scale on the LCD as the guideline.
– When playing a DVD movie, etc., adjust to a level near the maximum as
the guideline.
j When noise is heard
Select "MONO" using [342 1] .
j When there is interference with the local FM stations
1 Select "88.3 MHz" (factory preset) using [4] .
2 Using [2 1] , select a frequency between
88.3 MHz and 107.7 MHz which is not being
used by a broadcasting station.
≥The frequency can be set in 0.1 MHz increments.
FM TRANSMITTER
1
STEREO
88.3 MHz
MONO
23
23