Programming Methods; Default User Names & Passwords; Important System Default Values; Default Ip Address And Ethernet Settings - NEC SL 1100 Quick Start Manual

Programming Methods:

There are three methods of programming the SL1100 system:
•
Web Pro, using a Web Browser to connect to the system via the system's IP address.
•
PC Pro, using PC Pro Software to connect to the system's IP address or by NetBios by entering SL1100 in place
of system's IP address.. This also allows the ability to down load and upload system data bases as well as
provides some utilities and install wizards.
•
Phone Pro, programming from a SL1100 Multi-Line telephone. Access Phone Pro Programming by pressing
Speaker, #, *, # *.
•
Refer to SL1100 Features & Specs and Program Manuals for additional programming
Default User Names & Passwords:
There are different User Names and Passwords which allow a different program level access. The default User Names
and passwords are:
•
User Name: sltech
•
User Name: ADMIN1
•
User Name: ADMIN2
•
User Name: USER1
The sltech login has the most programs available to it, and is used primarily by the installing part.
Refer to the SL1100 Programming Guide for more details.

Important System Default values:

Default IP Address and Ethernet Settings:

DHCP Client:

By default the SL 1100 is enabled to receive its IP address, Subnet Mask & Default Gateway from the Network's
DHCP Server. If you need to statically assign the system's IP address you should go to program 10-63 and set
DHCP to 0 for No or disable, then reboot the system first.
Default IP Address & Subnet Mask:
If the system did not receive its IP Address information from a Network's DHCP server or if the system is not
connected to a Network it will have the following IP address by default:
CPU Network Interface Connection:
IP Address: 192.168.0.10 (Program 10-12-01)
Subnet Mask: 255.255.255.0 (Program 10-12-02)
VOIP DB Interface Connection:
IP Address: 172.16.0.10 (Program 10-12-09)
Subnet Mask: 255.255.0.0 (Program 10-12-10)
Password: 12345678 Access: To all Level 2 (IN) Installer level programs.
Password: 0000 Access: System Admin Level 1-Restricted Access.
Password: 9999 Access: System Admin Level 2-More Restricted Access.
Password: 1111 Access: User Programming Administrator Mode.
- 6 -
instructions.