Music Playback; Telephone Functions - Silvercrest CASQUE AUDIO SKOG 40 A1 Operating Instructions Manual

Music playback

♦ Connect the jack plug
headphone jack) on the playback device.
♦ Switch on the playback device and set the volume to minimum.
Put on the headphones as described in the section Wearing the head-
♦
phones.
♦ Set the desired volume on the playback device.
♦ Start playback on the playback device.
Multifunction button
1 x brief press (during playback)
1 x brief press (while paused)
Press for about 2 seconds

Telephone functions

NOTE
► It is possible that not all functions will be supported depending on the smart-
phone used and its operating system.
Making a call
♦ Use your smartphone to dial the required telephone number.
The call is automatically transferred to the headphones.
♦ Speak into the microphone
Accepting/ending/rejecting a call
NOTE
► If you are listening to music and receive a call, you will hear the ringtone in
the headphones and playback is stopped. After finishing the call, playback
will be resumed automatically.
SKOG 40 A1
4
of the audio cable
5
on the headphones to make your call.
3
to the audio output (e.g.
Function
Pause playback
Continue playback
Start voice control
GB │ IE │
7 ■