Tuner Setting - Panasonic AG-3200 Operating Instructions Manual

Setting clock manually
— Manual Clock Set
1 1 1 1 2 2 2 2
First follow steps to in "Preparations" above, then go to the
following steps.
A
Set time, date and year
Press until the desired time appears,
rt
then press OK or . Set the date and year
e
in the same way.
Holding changes the time in 30-
rt
minute intervals, or changes the date in
15-day intervals.
B
Select D.S.T. mode
Press OK or to move the highlight bar to
e
"D.S.T.", then press to select the
rt
desired setting.
ON: Adjustment will be made by the
built-in clock itself.
OFF: Select when Daylight Saving Time
does not apply to you.
C
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or repeatedly until the item you want to change
e
blinks, then press .
rt
Manual setting of the clock will be lost after a power failure
occurs.

Tuner Setting

Setting channels automatically
— Auto Channel Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
A
Access Main Menu screen, then Tuner
Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to "TUNER
SET", then press OK or .
e
B
Perform Auto Channel Set
Press to move the highlight bar
rt
(arrow) to "AUTO CHANNEL SET", then
press OK or . The VCR selects the correct
e
band (TV or CATV) automatically during
Auto Channel Set.
When Auto Channel Set is complete,
"SCAN COMPLETED" appears on
screen.
If the scan was unsuccessful, "SCAN
COMPLETED–NO SIGNAL–" appears on
screen. Check the connections and start
again.
Press MENU to return to normal screen.
to
rt
Setting channels manually
— Manual Channel Set
You can add the channels you want or delete the channels you do
not want manually.
A
Access Main Menu screen, then Tuner
Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to "TUNER
SET", then press OK or
B
Access Manual Channel Set screen
Press to move the highlight bar
rt
(arrow) to "MANUAL CHANNEL SET",
then press OK or .
e
C
Add or skip desired channels
To add channels
A
Press the Number keys on the Remote
to input a channel number you want to
add.
B
Press OK or to set to "ADD".
e
C
Repeat A to B to add other channels.
Press MENU to return to normal screen.
To skip channels
A
Press or the Number keys to select a channel number you
rt
want to skip.
B
Press OK or to set to "SKIP".
e
C
Repeat A and B to skip other channels. Press MENU to return
to normal screen.
After a power failure occurs, band selection will be reset to
"CATV".
— 8 —
to
rt
.
e