Connecting Peripherals - Panasonic Toughbook CF-P1P3CDG6M Operating Instructions Manual

Dealing with Problems

Connecting Peripherals

Peripheral is not recog-
nized even after driver is
installed.
Network
Cannot connect to the net-
work.
Sounds
Quality of recorded sound
is poor.
Play sound is recorded
e v e n t h o u g h t h e M i x
playsound checkmark is
off.
Noise in recording or play-
back sound.
Program Buttons
The program assigned to
the button does not start.
Character Input
Entering characters
46
Remove cards or other peripherals, and push the
reset switch.
Check the server information and network settings.
Tap
- [Voice recording format], and select a higher frequency.
Playsound (sound from the speaker) is being picked up
and recorded by the microphone. If you want to avoid
playsound recording completely, connect the headset or
the headphone.
If a load is applied during recording or playback, for
example when the SD memory card is disconnected or
connected, then noise in the recording or playback will
result. In this event, stop the recording or playback, and
restart after closing other applications.
When the program display of a start menu is changed
after assigning a program, if you press a button, that pro-
gram may not start. In that case, tap
[System] tab - [Panasonic Settings] - [Buttons] tab, and
re-assign the program.
< Only for CF-P1P1 series >
Characters can be input using the input panel.
( page 23)
- [Settings] - [Personal] tab - [Input] - [Options] tab
- [Settings] -