Wireless Settings - Canon 0585C006 Instruction Manual

Turn transmission wireless sensor (p.10) of the receiver unit toward the

sender, using the bounce function (p.28).
When shooting indoors, since the transmission signal is reflected off the

walls, operation may be possible even with slightly imprecise positioning.

Wireless Settings

To perform flash shooting using the optical transmission wireless
receiver function, configure the settings as follows.
Receiver Unit Setting
To perform normal flash shooting, select <F> to clear the wireless
(receiver) settings.
Transmission Channel Setting
To avoid interference with optical transmission wireless flash systems
used by other photographers, you can change the transmission
channel. Set the same channel for both the sender unit and
receiver unit.
Set to <:i>.
Operate and set the flash you want to

set as the receiver unit.
Press the < I

cross keys.
Turn <9> to select <:i>,

then press <8>.
Set a channel.
Press <8>.

Turn <9> to select the channel

symbol, then press <8>.
Wireless Settings
> button of the <S>
73