Sharp AR-SP6N Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Copier
  5. AR-SP6N
  6. Service manual
Sharp AR-SP6N Service Manual

Sharp AR-SP6N Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
q
[1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
[2] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
[3] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . 1
[5] OPEREATIONAL DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . . 5
[6] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
[7] DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . 8
[8] MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
[9] ELECTRICAL SECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Parts marked with "!" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SERVICE MANUAL
Digital copier
MODEL
CONTENTS
SHARP CORPORATION
CODE : 00Z
Reverse Single
Pass Feeder (RSPF)
Single Pass Feeder (SPF)
AR-SP6N
AR-RP6N
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
ARSP6N/A1E

Advertisement

Table of Contents
loading

Related Manuals for Sharp AR-SP6N

Summary of Contents for Sharp AR-SP6N

  • Page 1: Table Of Contents

    Digital copier Reverse Single Pass Feeder (RSPF) Single Pass Feeder (SPF) AR-SP6N AR-RP6N MODEL CONTENTS [1] PRODUCT OUTLINE ........1 [2] SPECIFICATIONS .

  • Page 3: Product Outline

    [1] PRODUCT OUTLINE [3] UNPACKING AND INSTALLATION Duplex document auto feeder AR-RP6N and document auto feeder AR-SP6N attached to a digital copier feeds originals automatically to 1. Unpacking allow continuous copying. For unpacking, refer to the figure below. [2] SPECIFICATIONS...
  • Page 4 Fit the SPF glass holder to the document glass. tions of the copier by holding the feeder at an angle toward the rear Attach the document glass to the copier and fix it with the screws. side. AR-SP6N/RP6N UNPACKING AND INSTALLATION – 2 –...
  • Page 5 50-06 to carry out adjustment referring to the service manual. 10. Attach the intermediate tray. (AR-RP6N only) Insert the intermediate tray all the way into the document feeder. AR-SP6N/RP6N UNPACKING AND INSTALLATION – 3 –...

  • Page 7: External View And Internal Structure

    Document length detection SW (Long) Photo transmission Detects the document length on the tray. COVER OPEN Book sensor Photo transmission Detects the SPF (RSPF) float. Paper exit sensor Photo transmission Detects presence of documents. AR-SP6N/RP6N EXTERNAL VIEW AND INTERNAL STRUCTURE – 4 –...

  • Page 9: Opereational Descriptions

    25) Paper exit roller rotation 26) Paper exit gate lifts up. 27) Documents are fed to the paper exit tray. 28) Next document 3 (YES) 3 Go to 4). 4 (NO) 29) RSPF motor OFF AR-SP6N/RP6N OPEREATIONAL DESCRIPTIONS – 5 –...
  • Page 10 8.5” x 13” 8.5” x 5.5” 8.5” x 5.5”R 11” x 8.5” Inch 11” x 8.5”R series 8.5” x 13” 8.5” x 14” 11” x 17” Note: Detection sensor ON: o , OFF: n AR-SP6N/RP6N OPEREATIONAL DESCRIPTIONS – 6 –...

  • Page 11: Adjustments

    * When the lens unit is moved, execute the OC main scanning direction magnification ratio magnification ratio adjustment SIM48-1 and SIM48-3, and execute (Front) the SPF document off-center adjustment. * This adjustment is basically completed with SIM63-7. AR-SP6N/RP6N ADJUSTMENTS – 7 –...

  • Page 12: Disassembly And Assembly

    0.1mm shift 1 - 4mm position Image loss: 3mm or less * Refer to the AR-SP6/RP6 Service Manual about the adjustment procedure required when attaching AR-SP6N to AR-M205/M160. AR-SP6N/RP6N DISASSEMBLY AND ASSEMBLY – 8 –...
  • Page 13 The size should be the distance from the tip of the clutch latch and the root of the clutch sleeve latch. 3) Sensor PWB 4.5mm 5) Clutch gear ass’y From Edge pawl 2.5~4.0 AR-SP6N/RP6N DISASSEMBLY AND ASSEMBLY – 9 –...
  • Page 14 7) Pick up roller, paper feed roller Bearing Note: When assembling, check that the paper exit gate hook is set in the solenoid groove. When assembling, the bearing D-cut surface should be faced down. AR-SP6N/RP6N DISASSEMBLY AND ASSEMBLY – 10 –...
  • Page 15 5. Document tray section 3) Document length sensor SW 1) Document tray 2) Rack cover AR-RP6N 6. Drive frame section 1) Book sensor AR-SP6N AR-SP6N/RP6N DISASSEMBLY AND ASSEMBLY – 11 –...
  • Page 16 0.5 ~ 2 mm when the pressure release solenoid plunger is pulled toward the sole- noid side. 3) Drive frame ass’y and drive belt 5) RSPF motor / SPF motor AR-SP6N/RP6N DISASSEMBLY AND ASSEMBLY – 12 –...
  • Page 17 Note: When assembling, check that the rib is in the clutch groove A and fix it with E-ring. 2) Transport roller gear AR-SP6N 3) Reverse gate AR-RP6N only Note: When assembling the inversion gate, apply grease G-484 on the area A. AR-SP6N/RP6N DISASSEMBLY AND ASSEMBLY – 13 –...
  • Page 18 0 0.5mm 8. Hinge L Note: When assembling the hinge L, reference is based on the mark of base tray and the center line of the 5 lines of the hinge L extended horizontally. AR-SP6N/RP6N DISASSEMBLY AND ASSEMBLY – 14 –...

  • Page 19: Maintenance

    Transport roller Cleaning Paper exit roller Cleaning 2. Clean the scanning section with the glass cleaner. 3. put the glass cleaner back into the original place. Note: When performing maintenance, refer to [7] DISASSEMBLY AND ASSEMBLY. AR-SP6N/RP6N MAINTENANCE – 15 –...
  • Page 21 AR-SP6N/RP6N ELECTRICAL SECTION – 16 –...

  • Page 22: Electrical Section

    AR-SP6N/RP6N ELECTRICAL SECTION – 17 –...
  • Page 23 AR-SP6N/RP6N ELECTRICAL SECTION – 18 –...
  • Page 24 AR-SP6N/RP6N ELECTRICAL SECTION – 19 –...
  • Page 25 AR-SP6N/RP6N ELECTRICAL SECTION – 20 –...
  • Page 27 /RSOL SGND SGND 24V1 24V1 CN7(B3B-PH-K-S) SELC# N.C. SGND SELB# /SPFMODB 24V1 SGND SELA# SPFMODB N.C. SGND SGND PA PER 2 /SPFCOVER /CLH 20 SPFCOVER 19 PA PER b. Solder surface 4-2. Sensor PWB AR-SP6N/RP6N ELECTRICAL SECTION – 21 –...
  • Page 29 両面原稿自動送り装置（ 両面原稿自動送り装置（ 両面原稿自動送り装置（RSPF RSPF RSPF） ） ） ） RSPF Digital Copier Single Pass Feeder (SPF) Reverse Pass Feeder (RSPF) AR-SP6N AR-RP6N MODEL このパーツガイドに掲載されている表示価格ランクは消費税抜きです。 CONTENTS 外装部 (Exteriors) 給紙部 (Paper feed unit) 搬送部 (Transport unit) 梱包及び付属品 (Packing material & Accessories) 索引 (Index) 本書はサービス活動用に作成した資料です｡...
  • Page 30 [AR-SP6N] 圧解ﾚﾊﾞｰ Pressure release lever MLEVF0041QSZZ [AR-RP6N] 圧解ﾚﾊﾞｰ Pressure release lever 45 LPLTM0111QSZZ 補強板ｱｰｽ Reinforce plate earth 46 DHAI-0446QSZZ SPF ﾊｰﾈｽ SPF harness CPWBF0084QSE3 [AR-SP6N] SPF 中継基板 SPF interface PWB CPWBF0084QSE4 [AR-RP6N] RSPF 中継基板 RSPF interface PWB – 1 –...
  • Page 31 Screw(3×8) 75 PSHEZ0438QSZZ ﾏｲﾗｰ B Sheet B 77 MSPRC0274QSZZ (Taiwan only) 圧解ﾚﾊﾞｰｱｰｽｽﾌﾟﾘﾝｸﾞ Pressure release lever earth spring 78 DHAI-0154QSZ1 [AR-SP6N] SPF ｸﾞﾗﾝﾄﾞ線 SPF ground wire 79 TLABH0601QSZZ (Japan only) 清掃注意ﾗﾍﾞﾙ Cleaning cautions label 80 TLABH0323QSZZ ｽｷｬﾅ方向指示ﾗﾍﾞﾙ Scanner direction directions label 81 CCLEZ0020QS01 SPF ｶﾞﾗｽｸﾘｰﾅｰ...
  • Page 32 給紙部 (Paper feed unit) PRICE RANK PART PARTS CODE DESCRIPTION MARK RANK 開閉ｷｬﾋﾞﾈｯﾄ 1 GCAB-0025QSE3 Open and shut cabinet 2 PSPO-0002QSZZ ｽﾄｯﾊﾟｰｽﾎﾟﾝｼﾞ Stopper cushion 4 MARMP0003QSZ1 ｽﾄｯﾊﾟｰｱｰﾑ Stopper arm 5 LSTPP0001QSZZ ﾍﾟｰﾊﾟｰｽﾄｯﾊﾟｰ Paper stopper 6 XEBSE30P08000 ﾋﾞｽ Screw(3×8) 7 CPWBF0017QSE2 ｾﾝｻｰ基板...
  • Page 33 給紙部 (Paper feed unit) PRP02402 – 4 –...
  • Page 34 41 PGIDH0044QSZZ 排紙ﾍﾟｰﾊﾟｰｶﾞｲﾄﾞ R Paper exit guide R 42 PSHEZ0397QSZZ 白ﾏｲﾗｰ White sheet 43 NROLR0102QSPZ PS ﾛｰﾗ - PS roller 44 PSHEZ0071QSZZ [AR-SP6N] 排紙 PG ﾏｲﾗｰ Delivery PG sheet 45 XHBSE30P08000 ﾋﾞｽ Screw(3×8) 46 XEBSD30P10000 ﾋﾞｽ Screw(3×10) ﾓｰﾀｰｱｰｽﾃｰﾌﾟ 47 PTPE-0018QSZZ...
  • Page 35 搬送部 (Transport unit) 60 66 PRP02403 – 6 –...
  • Page 36 梱包及び付属品 (Packing material & Accessories) PRICE RANK PART PARTS CODE DESCRIPTION MARK RANK 2 SPAKA0086QSZZ ｱﾄﾞ L Add L 3 SPAKA0087QSZ1 ｱﾄﾞ R Add R 4 SPAKA0152QSZZ 天ﾊﾟｯﾄﾞ Top add ﾎﾟﾘ袋 5 SSAKH3012KCZZ Vinyl bag(790×740) 6 SSAKZ0004QSZZ ﾎﾟﾘ袋 Vinyl bag(120×450) 7 SPAKA0088QSZZ 保護材...
  • Page 37 索引 (Index) PRICE R. PARTS CODE NEW P/R PRICE R. MLEVP0036QSZZ 1- 64 PARTS CODE NEW P/R MLEVP0037QSZZ 2- 36 MLEVP0047QSE1 3- 51 MLEVP0073QSZ1 1- 60 CARMP0028RS52 2- 502 MLEVP0078QSZZ 3- 73 CCAB-0024RS52 2- 501 AW FG MLEVP0090QSZ1 CCLEZ0020QS01 1- 81 MSPRC0062QSZZ CFIX-0022RS53 4- 11...
  • Page 38 PRICE R. PRICE R. PARTS CODE PARTS CODE NEW P/R NEW P/R PSHEZ0069QSZZ 1- 43 PSHEZ0071QSZZ 3- 44 PSHEZ0077QSZ1 1- 23 PSHEZ0078QSZZ 1- 25 PSHEZ0215QSZZ 1- 58 PSHEZ0252QSZZ 3- 55 PSHEZ0268QSZZ 1- 42 AC DD PSHEZ0284QSZZ 1- 30 PSHEZ0285QSZZ 1- 49 PSHEZ0397QSZZ 3- 42 PSHEZ0438QSZZ...
  • Page 39 LEAD-FREE SOLDER The PWB’s of this model employs lead-free solder. The “LF” marks indicated on the PWB’s and the Service Manual mean “Lead-Free” solder. The alphabet following the LF mark shows the kind of lead-free solder. Example: <Solder composition code of lead-free solder> Solder composition Solder composition code Solder composition...
  • Page 40  COPYRIGHT 2004 BY SHARP CORPORATION All rights reserved. Printed in Japan. No part of this publication may be reproduced, stored in a retrieval system, or transmitted. In any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Ar-rp6n

Table of Contents