Institute (ANSI C101.1, Leakage Current for characteristics as the recommended replacement part Appliances), and Underwriters Laboratories (UL might create shock, fire and/or other hazards. Product Publication UL1410, 59.7). safety is under review continuously and new instructions are issued whenever appropriate. DS17BS*...
Page 3
Use only an anti-static solder removal device. Some brushing clothes together, or lifting your foot from solder removal devices not classified as “anti-static” a carpeted floor can generate enough static can generate electrical charges sufficient to damage electricity to damage an ESD. ESDs. DS17BS*...
Operating Humidity : 10 % ~ 80 % Storage Temperature : 13 °F to 113 °F (-25 °C ~ 45 °C) Storage Humidity : 5 % ~ 95 % •Designs and specifications are subject to change without prior notice. DS17BS*...
Page 5
GND-G GND-G GND-G GND-B GND-B GND-B No Connection No Connection Not Used GND-Sync/Self Test GND-Sync/Self Test GND-Sync/Self Test DDC Data DDC Data DDC Data H-Sync H/V-Sync Not Used V-Sync Not Used Not Used DDC Data DDC Data DDC Data DS17BS*...
Page 6
B : Horizontal sync width O : Frame time total P : Vertical sync width C : Back porch D : Active time Q : Back porch R : Active time E : Front porch S : Front porch DS17BS*...
Page 7
B : Horizontal sync width O : Frame time total P : Vertical sync width C : Back porch D : Active time Q : Back porch R : Active time E : Front porch S : Front porch DS17BS*...
Page 8
2. Press the + key. Select upper lamp and press the menu key for 5 seconds. Then, select lower lamp and press the menu key for 5 seconds. Note : Please be sure to read the following instructions for details on service function. DS17BS*...
Page 9
4-6-2 How to Control Service Function OSD 1. With the panel selected on OSD, whenever you press the right key, the base color will change to blue from “Panel” to “Country”, “Pixel Shift”, “Lower Lamp”, “Upper Lamp”. Figure 3. DS17BS*...
Page 10
After changeing the Upper Lamp or Lower Lamp, 1. Select the Upper Lamp or Lower Lamp 2. Press the Menu key within an 5 seconds. Then, Ch. No and time will be reset to zero (selected item only). Figure 5. Figure 6. DS17BS*...
Page 11
- This function enables to select relevant OSD language for each region / country. - Worldwide : 7 languages (English, German, Spanish, French, Italian, Swedish, Russian) - Korean : 2 languages (Korean, English) - Chinese : 2 languages (Simplified Chinese, English) - Japanese : 2 languages (Japanese, English) Figure 8. Figure 8-1. DS17BS*...
3 Disassembly and Reassembly This section of the service manual describes the disassembly and reassembly procedures for the DS17BS* monitor. WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling these components. 3-1 Disassembly Cautions : 1. Disconnect the monitor from the power source before disassembly.
Page 15
*Do not replace lamp for the LTM170EX-L01 panel. *Note : No speciflc color for the wire connector of panel lamp is required. You can change a connector assemble. 3-3 Reassembly Reassembly procedures are in the reverse order of disassembly procedures. DS17BS*...
Check X102 or check Does the pulse appear at X102? it’s related circuit. While pushing the power key Check function key or does voltage drop from 5V to 0V check it’s related circuit. at Pin 16 of IC102? Replace IC102. DS17BS*...
Page 17
75 of IC101? Check IC102 and Does the pulse check it’s related circuit. appear at Pin 122 of IC101? Replace LCD panel. Check IC110 or check CN01 and check it’s related circuit. Replace IC101. Replace X101 or check it’s related circuit. DS17BS*...
Page 19
Press exit key for more than 5 seconds to do the factory preset. When pushing a front control button, does any change appear Replace front control button. at Pin 16 and 17 of IC102? Replace IC101 and check its related circuit. DS17BS*...
You can search for updated part codes through CMS web site. URL : http://ecms. samsungelectronics. com/ 7-1 Main PCB Parts Loc. No. Code No. Description Specification Remarks BN94-00479B ASSY PCB MAIN DS17BS CIS2 0202-001044 SOLDER-WIRE. S63S-W3.0,S63S,D3,63Sn/37Pb,- CIS3 0202-001222 SOLDER-WIRE FLUX RS-107,RS60-1.2AA,D1.2,SN60/PB40,- CIS6...
Page 34
Samsung Electronics Co.,Ltd. 416, Maetan-3Dong, Paldal-Gu, Suwon City, Kyungki-Do, Korea, 442-742 Printed in Korea This Service Manual is a property of Samsung P/N : BN82-00105C-00 Electronics Co., Ltd. http : //www.samsungmonitor.com (SyncMaster Worldwide) Any unauthorized use of Manual can be punished http : //www.samsung-monitor.com (SyncMaster USA)