Panasonic KX-TDA0484 Getting Started page 49

*1
When "En-bloc" is selected, you need to press "#" after dialing the phone number.
Note
For details about network parameter settings, refer to the relevant sections of the Hybrid
IP-PBX Feature Guide.
5.2 Programming the PBX in the Chicago Office
6. a.
Double-click System.
b.
Double-click Numbering Plan.
c.
Double-click Feature.
d.
In the Tie Line Access box, type the
dialing number.
e.
Click OK.
7. a.
Double-click Private Network.
b.
In the Own PBX Code box, type 41 (the
PBX code of the local PBX in the
network).
c.
In the Leading Number box, type 35
(the PBX code of the remote PBX in the
network).
d.
In the corresponding Trunk Group list,
click the number of the trunk (CO line)
group to be used when making calls.
e.
Set the number modification pattern, if
necessary.
f.
Click OK.
8. a.
Double-click Configuration.
b.
Double-click Slot.
c.
Click Status of the card.
d.
Set the status to OUS.
e.
Click Card Type of the card.
f.
In the Value list, click Overlap (default)
*1
or En-bloc .
g.
Click OK.
h.
Click Status of the card.
i.
Set the status to INS.
Getting Started 49