Panasonic KX-THA13 Operating Instructions Manual page 17

Taking a picture of the displayed image
while monitoring
Press {CAPTURE} when the desired
image is displayed.
L A title is assigned to the image and the
image is saved.
Note:
L To view the image, see "Picture gallery"
on page 20.
Cordless camera sensor
The cordless camera can page the
handset when it detects motion and/or
sound. Then the paged handset user can
answer the page to monitor the live video
from the cordless camera.
And also, the cordless camera takes
pictures (a total of 4 pictures, default) at
the time of detection and stores them. You
can view the images stored in the cordless
camera using the handset, then select and
save the desired images into the handset.
To use this feature, select "Motion &
Audio", "Motion only", or "Audio
only" in the cordless camera detection
mode beforehand (page 32).
L Each of the registered compatible
Panasonic units (KX-THA12/KX-THA16/
KX-THA17) can be paged from the
cordless camera. The base unit and a
compatible Panasonic handset (KX-
THA11) cannot be paged.
1
Cordless camera:
The cordless camera detects motion
and/or sound.
L The cordless camera produces a
camera tone and takes pictures.
L The cordless camera pages the
handset for 30 seconds.
For assistance, please visit http://www.panasonic.com/phonehelp
Monitoring using a Handset
2
KX-THA12/KX-THA16/KX-THA17:
Press {s} to answer the page.
L You can monitor the room where the
cordless camera is located.
L To start/finish talking with the other
party, press {2WAY}.
3
KX-THA12/KX-THA16/KX-THA17:
Press {OFF} to stop monitoring.
Note:
L The cordless camera can store the last
p j
Y
50 images from the most recent images
to the oldest. When the 51st image is
stored, the oldest image is automatically
erased (default, page 33). The number
of images the cordless camera can store
may decrease depending on memory
size, sharpness, etc. You can save the
desired images into your handset before
images are erased.
If "Camera detect" is displayed
If you do not answer the page from the
cordless camera, "Camera detect" is
displayed on the handset.
This lets you know if you should monitor
the cordless camera which paged you.
KX-THA12/KX-THA17:
1
{MENU} (F2) i H i {SELECT}
2
"Camera & Audio" i {SELECT}
3
Select the unit (indicated by z). i
{SELECT}
4
Press {OFF} to stop monitoring.
KX-THA16:
1
{MONITOR} (F5)
2
"Camera & Audio" i {SELECT}
3
Select the unit (indicated by z). i
{SELECT}
4
Press {OFF} to stop monitoring.
17