Recording Your Message
1.
to record your message.
1
•
Press [2] to add another
recipient (continue from
"Specifying the Recipients by
Number" or "Specifying the
Recipients by Name (Dialing by
Name)").
•
Press [3] to review the
recipients.
2.
Speak after the tone.
•
You can pause and resume
recording by pressing [2]. If you
pause for more than 20
seconds, recording will stop
automatically.
3.
to end recording.
1
4.
to accept.
2
5.
to set the delivery time
1
1
of the message.
to send the message
1
2
immediately (continue from step
10).
6.
Enter the desired delivery time,
then
.
#
For example:
•
To enter 5:00, press [5] [#].
•
To enter 5:15, press [5] [1] [5]
[#].
7.
for AM.
1
for PM.
2
•
This option may not be
available if the VPS is
programmed to use 24-hour
time.
8.
Enter the day of the month for
delivery, then
For example:
•
If today is February 16 and you
enter [1] [7] [#], the message
will be delivered tomorrow.
•
If today is February 16 and you
enter [5] [#], the message will
be delivered on March 5.
9.
to accept.
2
10.
to make the message urgent.
1
to continue.
2
11.
to make the message private.
1
to continue.
2
12.
to request a receipt.
1
to continue.
2
13.
Go on-hook.
Note
•
Auto Receipt is not enabled by default.
For more information, consult your
System Administrator or System
Manager.
•
New urgent messages are played
before any other messages. However,
old urgent messages are played with
other messages, in the original order.
Subscriber's Manual
.
#
31