Making The Wireless Link - Panasonic SH-FX65 Operating Instructions Manual

Setup

Making the wireless link

Refer also to the operating instructions for your home theater unit.
1
Turn on the wireless system.
Unit on/off button [POWER C I, B Í]
Use this button to turn the unit on and off.
C I: The unit is on.
AUTO OPERATION ON/OFF indicator
The indicator lights red when the unit is turned on and lights green
when the wireless link is activated.
When the wireless link is inactive for a long time, it turns red.
2
Turn on your home theater unit and check the wireless
link indicator on the home theater unit.
e.g. Display on the home theater unit
MONO SLP STCT DDTS PL
SRDE. PRG
PGM RND RDS
W1
EQ
W2 WS
3
Start play on the home theater unit.
Conserving power
The wireless system consumes a small amount of power, even when it is
off (approx. 0.2 W). To save power when the unit is not to be used for a
long time, unplug it from the household AC outlet.
6
B Í: The unit is off.
" [W1] "or an indicator should light up.
≥ If " [W1] " or an indicator is flashing,
refer to page 7, Troubleshooting guide.
∫ Pairing with existing SH-FX85
Your SE-FX65 can be used with SH-FX85, both operating on the same
wireless system as SH-FX85. By pairing, you can enjoy the benefits of
both systems working together simultaneously.
Preparation
≥Use the SH-FX85T transmitter card for pairing.
Store your SH-FX65T transmitter card in a cool dry place for later use.
≥Make sure that the speaker and AC cord connections on page 5 are
completed.
≥Turn on the home theater unit and SH-FX85, and then reduce the
volume.
1 Turn on SE-FX65.
2 While pressing [5/9] on the home theater unit,
press the numbered button [3] on the remote control until "P" lights
in the home theater unit's display.
≥The indicator on SE-FX65 turns green.
3 While "P" is displayed, press [I/D SET].
Use a pointed object.
4 While pressing [5/9] on the home theater unit,
press the numbered button [3] on the remote control.
≥" [W1] " or the wireless link indicator lights on the home theater unit.
5 Turn off and on SE-FX65.
≥Make sure the indicator on SE-FX65 lights up green.
[Note[
Repeat the above steps if you should use SH-FX65T transmitter card
(the link with SH-FX85 will be disconnected).
(not included)